Day Trade Company Money by Day Trade Institute
.
.
.
.
.
.
The purpose of this Major – Minor Trade Strategy is to simply get you some experience with the Company’s key indicators and have your experience setting up scalp and swing trading.
.
You will need full training. With training you will fully learn the Echo, TNT, Major/Minor, Pressure, Vector, and Put Call Indicators and their specific function and interrelationship to win trades. You will also learn general trade best practices of support and resistance, trade management with hedging and price averaging, and much more.
.
.
.
Trade Method Summary.
The Group’s proprietary indicators support both Scalp trading (short term / few PIPs) or Swing trading (long term / Several PIPs).
.
Scalp Trading
Time Charts – 5 minute, 15 minute, 30 minute, and 60 minute time charts.
Start Fairly Early – This means starting when all the signals of market movement are not all in agreement and not all in the trade direction. This is because when they do reach preferred agreement, the benefit of the trade is often past. This does require the trade start with some counter trend trading or trading with some indicators pointing in the opposite direction of the trade for a short period of time.
Get Out Early – This means setting a take profit at 5, 8, or 10 pips and getting out at the first opportunity of reasonable profit.  This is a type of method you can set your trades and forget about them. 
.
.
Swing Trading
Time Charts – 30 minute, 60 minute, 120 minute, and 240 minute time charts.
Starting Fairly Early – The same process as above.
Staying Fairly Late – This is not intended to be more risky, but to simply stay in the trade until the momentum in the trade begins to slow. By following this method the trade takes the largest safest profit available from the trade.
.
.
.
Swing Trade Method
The following method is more of a Start Early – Stay Late method that creates a form of swing trading.
.
Trade Entry
Determine Trade Signal
A Buy Signal = All turned up.  240M Major/Minor, 120M MM, and 60M MM are turned up and often the 30M MM has crossed the channel.
A Sell Signal – All turned down.  240m MM, 120M MM, and 60M MM are turned down and often the 30M MM has crossed the channel.
.
240M Pressure Strength Considerations:
Steepness – The Pressure Lines (and Major / Minor) lines the more “attitude” or strength in the indicator.
No Buy – If the pressure is steeper than 45° down.
No Sell – If the pressure is steeper than -45° up.
Higher Agreement – The sentiment to buy (green line) and the sentiment to sell (red line) are in more agreement the tighter and converging the lines.
More Riskier Counter Trend Trade – Riskier to trade contrary to tighter or converging lines.
Lower Agreement – The sentiment to buy (green line) and the sentiment to sell (red line) are in less agreement the more separated and diverging the lines.
Less Risky (but risky) Counter Trend Trade – It is less risky to trad against the pressure the more separated or diverging the lines.
.
No Buy Trade – If the 240M P lines are near touching and oriented flat or downward (opposite a buy).
No Sell Trade – If the 240M P lines are near touching and oriented flat or upward (opposite a sell).
No Buy Trade – If the 240M P lines are downward more than 45 degrees no matter what the green and red line tightness.
No Sell Trade – If the 240M P lines are upward more than 45 degrees no matter what the green and red line tightness.
.
Determine Trade Strength And Safety – If the trade is permissible, assess the combined or summed direction of the 240M Major/Minor and 240M Pressure:
Strong – Summed orientation is clearly in the direction of the trade.
Typical – Summed orientation is generally in the direction of the trade.
Risky – Summed orientation is somewhat not in the direction of trade.
None – Summed orientation is clearly not in the direction of the trade, so do not make the trade.
.
.
Trade Exit
Full Trade Exit – Allowing the trade to move its full run and then exiting as the trade shows it is losing momentum.
30M MM Bending – Riskier trades or those that change to a riskier trade need an earlier exit.
60M MM Bending – Normal trades or trades that improve to a normal trade.
120M MM Bending – Stronger trades or trades that improve to a stronger trade can stay in the trade longer.
240M MM Bending – Emotional trades that are or are evolving to make large trade movement.
Pre-Set Trade Exit (not used in the Demo) – The expert coaches will teach the use of chart technical analysis to determine a price point to set a fixed Take Profit.
.
.
.
Buy Trade Initial Identification And Entry Pattern.
A buy signal is initially identified with the turning upward of the 240M MM, 120M MM, 60M MM, and 30M MM indicators.
.
Entry Considerations
♦  Take the trade no sooner than when the 240M MM flattens and ideally turns upward.
.
.
.
Exit Considerations
♦  Exit when the exit bend pattern occurs at the chart time suggested by the trade exit strength (see examples that follow).
♦  Before exiting check the chart to see if there is any trade improvement or trade degradation.
•  Stay in if there is reasonable support that more can be gained in the next moments. 
•  Get out of the trade earlier if the trade is degrading or weakening.
.
.
.
Sell Trade Initial Identification And Entry Pattern
A sell signal is initially identified with the turning downward of the 240M MM, 120M MM, 60M MM, and 30M MM indicators.
.
Entry Considerations
♦  Take the trade no sooner than when the 240M MM flattens and ideally turns downward.
.
.
.
Exit Considerations
♦  See the comments listed in the Buy Signal Exit Considerations above.
.  


.

Buy Trade Entry And Exit Summary
An organized summary of strong to weak buy position entry and exit strategies.
.
Summary Table
.
.
.
Buy Considerations – See the Trade Strategy Summary at the top of this webpage.  In summary of the most critical trade permission consideration:
No Buy Trade – Do not make a buy trade if the 240M P lines are near touching and oriented flat or downward (opposite a buy).
No Sell Trade – Do not make a sell trade if the 240M P lines are near touching and oriented flat or upward (opposite a sell).
No Buy Trade – Do not make a buy trade if the 240M P lines are downward more than 45 degrees no matter what the green and red line tightness.
No Sell Trade – Do not make a sell trade if the 240M P lines are upward more than 45 degrees no matter what the green and red line tightness.
.
.
Exit Considerations – See the Trade Strategy Summary at the top of this webpage.  Two points worth repeating:
Know Exit strategy – Determine when the trade will be exited (…, 60M MM, 120M MM, …) before the trade is placed.
Trade Protection – Always set a trade hedge after placing the trade.  Buy Stop = Pending Buy.  Sell Stop = Pending Sell.  Set at 50 PIPs from trade entry.
.

.

B3:  Buy – Strong
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Buy
♦  240M MM strongly upward with 120M MM, 60M MM, and 30M MM are all turned up.
.
Trade Strength – Strong Buy
♦  240M Major / Minor (strongly upward) + 240M Pressure (clearly upward) = Strong Buy (strongly up + clearly up is strongly upward).
.
.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (strongly upward) + 240M Pressure (tending upward) = Still buy sentiment (sum is strongly upward).
.
Trade Exit – 120M MM Bend
♦  Exit when 120M MM R/G Major lines bend noticeably.
♦  The G/B lines may have already bent or tuned, but this simply confirms trade momentum is slowing.
♦  The 120M P and 60M P can add some secondary confirmation of direction continuation and support.
.
.

.

B2:  Buy – Typical / Normal
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Buy
♦  240M MM flat with 120M MM, 60M MM, and 30M MM are all turned up. It would be better if the 240M Minors were also flat or turned up.
.
Trade Strength – Buy
♦  240M Major / Minor (flat R/G > down G/B) + 240M Pressure (clearly upward) = Risky Buy (flat + up is generally upward).
.
.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (strongly upward) + 240M Pressure (solidly upward) = Still solid buy sentiment (sum is strongly upward).
.
Trade Exit – 60M MM Bend
♦  As in this case, if the trade retains or strengthens its buy trade sentiment, then one could chose to exit at a longer time, such as 120M MM in this case.
♦  In simply following a rule pattern, exit with the 60M MM, when 60M MM R/G Major lines bend noticeably.
♦  G/B Minor line movement are more of a confirmation of sentiment change. In this case indicating some strengthening to stay in for the 120M MM exit.
♦  The 120M P and 60M P can add some secondary confirmation of direction continuation.
.
.

.

B1:  Buy – Risky
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Buy
♦  240M MM turned up with 120M MM, 60M MM, and 30M MM are all turned up.
.
Trade Strength – Risky Buy
♦  240M Major / Minor (somewhat upward) + 240M Pressure (clearly downward) = Risky Buy (sum is generally downward).
.

.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (bend upward) + 240M Pressure (downward) = A Risky Buy stayed, so get out sooner than later.
.
Trade Exit – 30M MM Bend
♦  As the trade did not improve much and as it was already a risky trade, then take the movement that did occur and get out with the 30M MM bend.
♦  Exit with the 30M MM, when 30M MM R/G Major lines bend noticeably.
♦  The 120M MM and 60M MM are still downward and confirm the trade did not develop as a solid buy, so get out sooner than later.
.
.

.

B0:  Buy – No Buy
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
No Entry
Trade – A Buy
♦  240M MM turned up with 120M MM, 60M MM, and 30M MM are all turned up.
.
Trade Strength – No Buy
♦  240M Major / Minor (downward) + 240M Pressure (downward) = No Buy (sum is downward).
.
.
.
No Entry, No Exit
.

.

B4:  Buy – Uniquely Strong / Steep
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Buy
♦  240M MM turned up with 120M MM, 60M MM, and 30M MM are all turned up.
.
Trade Strength – Risky Buy
♦  240M Major / Minor (clearly upward) + 240M Pressure (downward and flattening) = Buy (sum is generally upward).
.

.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (strongly upward) + 240M Pressure (steep upward) = The trade strengthened greatly, so stay in a longer.
.
Trade Exit – 240M MM Bend
♦  As the trade strengthened greatly stay in and exit with the 240M MM when it bends.
♦  Largely watching the R/G Major lines of the 240M MM and when they noticeably bend.
♦  The G/B Minor lines below have turned, and provide an indication of loss of momentum, but follow the R/G Major lines.
♦  Read the 120M P, 120M MM, 60M P, and 60M MM for confirmation of the strength of the 240M P and 240M MM continuation signals.
.
.
.


.

Sell Trade Entry And Exit Summary
An organized summary of strong to weak buy position entry and exit strategies.
.

.

S3:  Sell – Strong
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade Entry – A Sell
♦  240M MM strongly downward with 120M MM, 60M MM, and 30M MM are all turned down.
.
Trade Strength – Strong Sell
♦  240M Major / Minor (strongly downward) + 240M Pressure (strongly downward) = Strong Sell (sum is strongly downward).
.

.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (strongly downward) + 240M Pressure (strongly downward) = A strong sell continued as a strong exit.
.
Trade Exit – 120M MM Bend
♦  As the trade retained its strong sell sentiment, then stay in the market longer and exit with the 120M MM Bend.
♦  Exit with the 30M MM, when 30M MM R/G Major lines bend noticeably.
♦  The steep or strong 120M P and 60M P can add some secondary confirmation of direction continuation.
.
.

.

S2:  Sell – Typical / Normal
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Sell
♦  240M MM downward with 120M MM, 60M MM, and 30M MM are all turned down.
.
Trade Strength – Sell
♦  240M Major / Minor (clearly downward) + 240M Pressure (flat) = Sell (downward + flat is downward).
.

.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (bending downward) + 240M Pressure (flat) = Original sell character remains so take the typical 60M MM exit.
.
Trade Exit – 60M MM Bend
♦  As the trade largely retained its original sale character, without trade improvement then exit at 60M MM Bend.
♦  Exit with the 30M MM, when 30M MM R/G Major lines bend noticeably.
♦  The mixed 120M P and 60M P confirm that a typical exit is appropriate.
.
.

.

S1:  Sell – Risky
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Sell
♦  240M MM turned down with 120M MM, 60M MM, and 30M MM are all turned down.
.
Trade Strength – Risky Sell
♦  240M Major / Minor (downward) + 240M Pressure (clearly upward) = Risky sell (sum is generally upward).
.

.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (bend downward) + 240M Pressure (solidly upward) = A Risky Sell is retained, so get out sooner than later.
.
Trade Exit – 30M MM Bend
♦  As the trade did not improve much as it was already a risky trade, then take the movement that did occur and get out with the 30M MM bend.
♦  Exit with the 30M MM, when 30M MM R/G Major lines bend noticeably.
♦  The 120M P and 60M P can show a buy pressure still exists so get out soon why there is still some sell sentiment.
.
.

.

S0:  Sell – No Sell
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
No Entry
Trade – A Sell
♦  240M MM flat to down with 120M MM, 60M MM, and 30M MM are all turned down.
.
Trade Strength – No Sell
♦  240M Major / Minor (flat) + 240M Pressure (strongly upward) = No Buy (sum is clearly upward).
.
.
.
No Entry, No Exit
.

.

S4:  Sell – Uniquely Strong / Steep
The trade assessment sequence for identifying a potential trade and determining trade strength.
.
Entry
Trade – A Buy
♦  240M MM turned down with 120M MM, 60M MM, and 30M MM are all turned down.
.
Trade Strength – Risky Buy
♦  240M Major / Minor (steeply downward) + 240M Pressure (steeply downward) = Strong Sell (sum is clearly a strong sell).
.
.
.
Exit
End Of Trade – Strength Assessment
♦  240M Major / Minor (strongly downward) + 240M Pressure (steep downward) = The trade strengthened greatly, so stay in a longer.
.
Trade Exit – 240M MM Bend
♦  As the trade strengthened greatly stay in and exit with the 240M MM when it bends.
♦  Largely watching the R/G Major lines of the 240M MM and when they noticeably bend.
♦  The G/B Minor lines below have turned, and provide an indication of loss of momentum, but follow the R/G Major lines.
♦  Read the 120M P, 120M MM, 60M P, and 60M MM for confirmation of the strength of the 240M P and 240M MM continuation signals.
.
.

.

This First Trading Strategy is just that, a simple system to get you into the market with usual wins. You need our one-on-one online training with our expert coaches. As soon as you realize the value and potential of the Company indicators, Company funded accounts, and Company support you need to be in training.
.
The purpose of the trading portion of the demo trial is not to become proficient in trading. It is to gain some experience, appreciate the power of the indicators when properly used, and gain feels from wins and feelings from losses.
.
Other important aspects of the Demo Trial are participation in the live online trades, attend the online or onsite meetings, gain some initial knowledge from the courses and videos, get acquainted with the Company, and generally gain trust in the organization and appreciate that you have something truly worth your time and tuition investment. As soon as that realization occurs, you need to be in training to get started.
.